BYQBK - 16220 LOCK BOND MULTI-PURPOSE CONTACT CEMENT #181
- MSDS: BYQBK
- Manufacturer: MACKLANBURG DUNCAN
- Product Name: 16220 LOCK BOND MULTI-PURPOSE CONTACT CEMENT #181
- National Stock Number: 8040-00F045081
Product Identification
Product ID:16220 LOCK BOND MULTI-PURPOSE CONTACT CEMENT #181
MSDS Date:01/17/1991
FSC:8040
NIIN:00F045081
MSDS Number: BYQBK
Responsible Party
OKLAHOMA CITY, OK 73118-5000
US
Emergency Phone: 405-528-4411
Info Phone: 405-528-4411
Cage: 82464
Contractor
Telephone: 800-654-8454 / 405-528-4411
Cage: 82464
Ingredients
HEXONE, METHYL ISOBUTYL KETONE (MIBK), 4-METHYL-2-PENTANONE
CAS: 108-10-1
RTECS: SA9275000
Fraction By Weight: <5%
OSHA PEL 410 MG/CUM
ACGIH TLV: 205 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE
CAS: 64742-89-8
Fraction By Weight: <60%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
TOLUENE (IARC CARC- GROUP 3) *95-3*
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: <12%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *95-3*
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: <3%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM, SKIN
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
700 GM/L
RTECS: 9999999VO
2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: <15%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HIGH CONCENTRATIONS MAY
CAUSE RESPIRATORY TRACT IRRITATION, CENTRAL NERVOUS SYSTEM
DEPRESSION. SKIN: PROLONGED/REPEATED CONTACT MAY LEAD TO DERMTITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, NAUSEA
Medical Cond Aggravated by Exposure:LIVER CONDITIONS.
First Aid
First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/WATER FOR 15 MINS.
INGESTION: DON'T INDUCE VOMITING. KEEP HEAD BELOW HIPS TO PREVENT
ASPIRATION OF LIQUID. INHALATION: REMOVE FROM AREA & ADMINISTER
OXYGEN IF NECESSARY. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:SCC
Flash Point:21F
Lower Limits:1.8
Upper Limits:11.5
Extinguishing Media:CO2, FOAM, DRY CHEMICAL/WATER FOG
Fire Fighting Procedures:DON'T ENTER CONFINED SPACE W/O FULL BUNKER
GEAR. USE SELF CONTAINED BREATHING APPARATUS IN POSITIVE PRESSURE
MODE & FULL PROTECTIVE GEAR. DON'T BREATHE FUMES.
Unusual Fire/Explosion Hazard:TOXIC GASES & AEROSOLS MAY BE PRODUCED
DURING BURNING. IF VAPOR IS PRESENT IN HIGH CONCENTRATIONS, IT WILL
BURN. FLAMMABLE.
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. DIKE AREA TO
PREVENT RUN-OFF. PUMP LIQUID INTO CONTAINERS. COVER REMAINING
MATERIAL W/SAND, DIRT, CLAY/VERMICULITE & PLACE IN CONTAINERS.
VENTILATE AREA. USE NON-METALL IC CONTAINERS. (SEE SUPPLEMENTAL
DATA)
Handling
Handling and Storage Precautions:DON'T STORE NEAR HEAT SOURCES,
SPARKS/FLAME. STORE BETWEEN 40 & 120F. DON'T FREEZE. KEEP AWAY FROM
CHILDREN.
Other Precautions:AVOID CONTACT W/EYES. DON'T INGEST. DON'T BREATHE
FUMES.
Exposure Controls
Respiratory Protection:NOT NORMALLY NEEDED, BUT IF TLV IS EXCEEDED, USE
NIOSH APPROVED RESPIRATOR W/ORGANIC VAPOR CARTRIDGE.
Ventilation:ADEQUATE TO KEEP VAPORS BELOW TLV.
Protective Gloves:SOLVENT RESISTANT
Eye Protection:SAFETY GOGGLES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH AFTER USE.
Supplemental Safety and Health
VAPOR PRESSURE DATA IS FOR METHYL ETHYL KETONE. SPILL PROCEDURES
CONT'D: PLACE IN NON-LEAKING CONTAINERS. PILLOWS/GEL POWDERS MAY
ALSO BE USEFUL IN CLEANING UP.
Chemical Properties
Boiling Pt:B.P. Text:146F
Vapor Pres:70 (SUPP)
Vapor Density:2-3
Spec Gravity:0.84
Evaporation Rate & Reference:(BU ACETATE=1): 0.6-3.8
Solubility in Water:SLIGHT
Appearance and Odor:THIN, PALE YELLOW, POURABLE LIQUID W/STRONG SOLVENT
ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS, BASES
Stability Condition to Avoid:FREEZING, HEAT, SPARKS, FLAME & OTHER
IGNITION SOURCES
Hazardous Decomposition Products:CO, CO2
Disposal
Waste Disposal Methods:PLACE IN RCRA APPROVED DISPOSAL FACILITY. WET
MATERIAL IS A HAZARDOUS WASTE. DISPOSE OF IN ACCORDANCE W/LOCAL,
STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.